Willcox Corvette Installs the 77-82 Temperature Gauge Adjustable Resistor
Willcox Corvette Adjustable Temperature Resistor Installation 1968-1976
Notes: If pre-testing before you install, you must have ohms input for the gauge to work. If you don’t have any input the gauge will to go full cool, if you ground the ohms input wire the gauge will peg hot. You can verify the resistor is working by testing ohms resistance between the two stud holes that mount the board to the back of the gauge. The range is 1 to 150 ohms and the resistor is pre-set at 90 ohms.
Willcox Corvette C4 1984-1996 Rear Hatch Weatherstrip Installation Video Click on the link below.
Willcox Corvette Bench test a 1968 Corvette Wiper Motor Ver 1 02-2010
Willcox Corvette Testing a 1969-1972 Corvette Wiper Arm Vacuum Switch