The following upload is from the GM factory Service Manual and starting on page 3, will cover how to disassemble, repair and reassemble the 1958-1962 Wiper Motor. 1958-1962 Corvette Wiper Motor Rebuilding <-Click Here
This file contains all the ignition settings as well as the distributor specifications including the end play thrust for the distributor main shaft. 58-62 SHOP MANUAL ST12 ENGINE Ignition System Distributor Click here for supporting document.
How to remove the Speedometer Needle (tach) from a 1953-1977 Corvette
This works for the Tachometers from 1953-1974
Front Suspension Repair 58-62 From ST12
Original GM Corvette Fuel Injection Fuel Meter Pump Drive Shaft Seal replacement instructions. The GM replacement seal kit included this instruction sheet on how to replace. Compliments of Jerry Bramlett To view, click the supporting pdf document below. 7017174-corvette-fuel-injection-seal-instructions-rev08032015
Typically we called this the old fart vacuum chart. Or what does my vacuum gauge tell me. On a typical engine: Steady 17-22 hg = normal engine operation. Low but steady = Late ignition, valve timing or low compression. Very … Continue reading